Garage Door Spring Repair and Replacement
Crucial to any garage door installation are the springs. Depending on which model garage door you have, Action Garage Door’s experienced technicians will install either torsion or extension garage door springs. Most importantly, the nature of garage door spring systems make spring replacement a task that should only be handled by a professional. Garage door springs are under high tension and the National Safety Council warns consumers that only qualified individuals should adjust or replace garage door springs.
Torsion Garage Door Springs
Torsion springs are placed upon a metal tube on the wall upper side of the garage door. Drums on either side of the tube are designed to move up the cable and pull the garage door. The springs unwind and lose power as the door rolls overhead. The rate at which this happens to the torsion spring is called inch pounds per turn (IPPT).
The IPPT of each spring is based on the height of the door, weight of the door, radius of the tracks, and radius of the drums. In order for your garage door to be balanced and work properly, the springs must be carefully set according to the manufacturer’s recommendations. Most manufacturers distribute 10,000-cycle springs with new garage doors, meaning, you should be able to open and close your garage door 10,000 times before any springs break.
Action Garage Door recommends replacing the stock 10,000-cycle springs with extended-life cycle springs that we warranty for life. Our garage door service and garage door repair company, we offer some of the most reliable warranties and services in the business.
Garage Door Extension Springs
Our experienced garage door technicians also work with two types of extension spring systems. First, there are extension springs for sectional garage doors that open straight up and curl overhead in four or five sections. These springs are mounted from the ceiling support above the horizontal track and extend toward the opening as the door closes.
This extension system uses pulleys to route a cable from each side of the door to the spring and back to the track. As your door closes, the springs stretch toward the door opening. The second type of extension spring is found on one-piece garage doors. A one-piece door swings outward as it rolls up and overhead. On either side of the garage door opening, about waist high, extension springs are mounted to a lever and bracket system that extends the springs toward the ceiling as the door closes.
This type of system is dangerous, which is why it is no longer manufactured. If you have a one-piece garage door with a broken extension spring, we recommend door replacement for safety and durability.
Other Garage Door Parts We Repair
Action Garage Door Repair Specialists Are Ready to Earn Your Business!
Contact us online or call the location nearest you.
In Dallas-Fort Worth and surrounding Texas cities, call 972-254-4040 or 817-633-3119.
In Austin TX area cities, call 512-447-3667.
In Houston and surrounding communities, call 713-222-1500 | 281-752-7100.
In San Antonio and surrounding area, call 210-762-5331.